TECHNICAL BULLETIN  
Kemiko® Stone Tone™  
Sealer II (46 Series)  
Concrete  
Coatings &  
Floor systems  
Description  
KemikoStone Tone™ Sealer II (46 series) is a low viscosity, low odor, single component, acrylic  
water-based sealer that can be used to product bare concrete, Stone Tone™ acid stained concrete,  
and Rembrandt™ Polymer stained concrete without giving a wet-look. This user friendly easy-to-  
apply coating is designed to be a waterproofing sealer for horizontal and vertical cementitious  
substrates such as concrete and masonry. Benefits include low VOC, chemical resistance, stain  
resistance, and UV resistance. KemikoStone Tone™ Sealer II is available in clear gloss or flat finish  
variations, and is an excellent replacement product for high VOC lacquers, acrylics, and varnishes.  
Applications  
KemikoStone Tone™ Sealer II can be applied over properly prepared concrete, KemikoStone  
Tone™ Stains, and Rembrandt™ Polymer Stains as a resilient protective finish coat. Typical applications  
include commercial and residential cement floors, hospitals, showroom floors, schools, shopping malls,  
patios, walkways and many other interior/exterior floor surfaces requiring additional protection.  
Physical Characteristics  
Kit Size  
1 gallon, and 5 gallon kits available  
Clear High Gloss and Satin Finish  
<25% volume solids  
Colors Available  
Volume Solids  
VOC Contents  
Specific Gravity  
Specific Gravity  
Gloss @ 60˚  
<100 g/L (Theoretical) Compliant to SCAQMD Rule 1113  
1.01 (theoretical)  
1.01 (theoretical)  
Gloss >90 Gloss Units; Flat <70 Gloss Units (ASTM D523)  
F (ASTM D3363)  
Hardness  
Adhesion  
Tape Test Result: 3B (ASTM 3359)  
Film Thickness  
Coverage Per Kit  
3-4 mils wet  
1gal- 400ft2 - 500ft2 (27.9m2 - 46.5m2) at recommended wet film thickness  
5gal- 2000ft2 - 2500ft2 (139.3m2 – 232.3m2) at recommended wet film thickness  
Note: Coverage rates will vary depending on surface texture and porosity  
Dry/Recoat Time  
Dry to Touch: 2-3 hours  
Light Foot Traffic: 8-10 hours  
Heavy Traffic: 20-24 hours  
Full Chemical & Physical Resistance Cure: 3-5 days  
Recoat Window: Within 3 hours after product reaches Dry to Touch state  
Note: Product tested at 70°F and 30% RH. Dry and recoat times will depend on tem-  
perature, humidity and other conditions relative to the environment.  
Odor  
Low odor  
Primers  
Thinning  
Clean Up  
Shelf Life  
No primer required  
Do not thin product  
Clean tools with acetone, denatured alcohol, or MEK  
12 months from date of manufacture  
TECHNICAL BULLETIN  
Kemiko® Stone Tone™  
Sealer II (46 Series)  
Concrete  
Coatings &  
Floor systems  
Packaging Description  
Weight per Kit:  
1Gal: 8.44lbs (3.83kg)  
5Gal: 42.20lbs (19.14kg)  
KemikoStone Tone™ Sealer Gloss 46C-1 contains:  
8.44lbs (3.83kg) / 1Gal (3.78L) of product in a premeasured 1 gallon (3.78L) container  
42.20lbs (19.14kg) / 5Gal (18.93L) of product in a premeasured 5 gallon (18.93L) container  
Environmental Conditions  
Apply between 50ºF - 85ºF (10ºC - 29ºC) and 5ºF (3ºC) above dew point. Avoid using in direct  
sunlight. Do not apply on rainy or foggy days.  
Storage Conditions  
Store between 50ºF - 100ºF (10ºC – 37.8ºC). Keep in a cool, well-ventilated area, away from direct  
sunlight and heat. Store in a segregated and safe area, avoiding all possible sources of ignition.  
Safety  
Care should be taken when using this product. During application, use proper protective equipment  
including, but not limited to; protective eye wear, proper respirator, and protective gloves. Ensure  
work spaces are well ventilated. Refer to the Application Bulletin for application information. Refer to  
product label and SDS carefully for more detailed safety information prior to use or handling  
Disclaimer  
Information provided in this technical bulletin is based on laboratory testing and is used as a guideline  
only. Customer should test the material for their specific application and under their application  
conditions before using the product on a project.  
Warranty  
The following warranty is made in lieu of all other warranties, either expressed or implied. This product is manufactured of  
selected raw materials by skilled technicians. Neither seller nor manufacturer has any knowledge or control concerning the  
purchaser’s use of this product and no warranty is made as to the results of any use. The only obligation of either seller or  
manufacturer shall be to replace any quantity of this product that is proved to be defective. Any claim of defective product  
must be received in writing within one (1) year from date of shipment. Neither seller nor manufacturer assumes any liability for  
injury, loss or damage resulting from use of this product.  
Contact us for any additional application information.  
EPMAR Corporation - A Quaker Houghton Company  
9930 Painter Ave, Whittier, CA 90605-3254  
A QUAKER HOUGHTON COMPANY  
Rev03.2021  
P: 562.946.8781 F: 562.944.9958  
epmar.com | kemiko.com