Concrete  
Coatings &  
Floor Systems  
TECHNICAL BULLETIN  
Kemiko® Color Enhancing  
Acrylic Concrete Sealer (39C-1)  
Description  
Kemiko Color Enhancing Acrylic Concrete Sealer (39C-1) is a low solids, single component, deep penetrat-  
ing sealer. This product is a user-friendly, non-yellowing, UV-resistant, durable, clear, high gloss film that will  
protect against efflorescence and weathering exposure to sun, salt and rain. This color enhancing sealer  
provides a protective, easy-to-clean and wet-look concrete surface, that still allows the concrete to breathe.  
Applications  
This product is well suited for interior or exterior applications that require a high gloss floor appearance,  
while still maintaining the texture of the underlying material. Typical commercial and residential applications  
are: concrete floors (including stenciled, stamped and acid stained), concrete pavers, concrete overlays,  
driveways, sidewalks, patios, garage floors, terrazzo and porous stone.  
Physical Characteristics  
Packaging  
Five (5) Gallon container  
Colors Available  
Solids Content  
VOC Content  
Specific Gravity  
Gloss  
Clear, High Gloss Only  
>25% Weight Solids  
<600 g/l (Theoretical)  
0.89 (Theoretical)  
@60º, >100 Gloss Units (ASTM 3359)  
3H (ASTM D3363)  
Hardness  
Adhesion  
Tape Test Result: 5B 0% area removed (ASTM 3359)  
3-5 mils wet  
5 Gallon: 1500ft2-2500ft2 (139.3m2-232.3m2) at recommended film thickness  
Film Thickness  
Coverage per Kit  
Note: Coverage rates will vary depending on surface texture and porosity  
Dry/Recoat Time  
Dry to Touch: 30-45 min  
Light Foot Traffic: 4-5 hours  
Heavy Traffic: 20-24 hours  
Full Chemical/Physical Resistance Cure: 3-5 days  
Recoat Window: within 5 hours after product reaches Dry to Touch state  
Note: Product tested @70ºF (21oC), 30% RH. Dry and recoat times will depend  
on temperature, humidity and other conditions relative to environment.  
Odor  
Mild, Ester-like  
Hot Tire Pickup  
Primers  
This product is hot tire resistant  
None required  
Thinning  
Clean Up  
Shelf Life  
Do not thin  
Clean tools with acetone, denatured alcohol or MEK  
12 months from date of manufacture  
Concrete  
Coatings &  
Floor Systems  
TECHNICAL BULLETIN  
Kemiko® Color Enhancing  
Acrylic Concrete Sealer (39C-1)  
Packaging Description  
Weight per Kit:  
37.00lbs (16.78kg)  
Kemiko Color Enhancing Acrylic Concrete Sealer (39C-1) contains:  
37.00lbs (16.78kg) / 5Gal (18.93L) of product in a premeasured 5 gallon (18.93L) container  
Clean Up  
Use warm water and mild soap to clean hands and skin. Use acetone, denatured alcohol or MEK to clean  
tools.  
Environment  
Apply between 50ºF-80ºF (10ºC-27ºC) and 5ºF (3ºC) above dew point. Avoid using in direct sunlight.  
Do not apply on rainy or foggy days.  
Storage  
Store between 50ºF-100ºF (10ºC-32ºC). Keep in a cool, well-ventilated area, away from direct sunlight  
and heat. Store in a segregated and safe area, avoiding all possible sources of ignition.  
Safety  
Care should be taken when using this product. Contents are flammable. Ensure no sources of ignition are  
in proximity to the product prior to or during application. Turn off any pilot lights, water heaters or any other  
auto-ignition sources in the area. Do not smoke around the product while applying or while it is drying.  
Ensure work spaces are well ventilated.  
During application, use proper protective equipment including, but not limited to: protective eye wear,  
protective gloves and proper respirator. Refer to the Application Bulletin for application information.  
Refer to product label and SDS carefully for more detailed safety information prior to use or handling.  
Disclaimer  
Information provided in this technical bulletin is based on laboratory testing and is used as a guideline only.  
Customer should test the material for their specific application and under their application conditions before  
using the product on a project.  
Warranty  
The following warranty is made in lieu of all other warranties, either expressed or implied. This product is manufactured of selected raw  
materials by skilled technicians. Neither seller nor manufacturer has any knowledge or control concerning the purchaser’s use of this  
product and no warranty is made as to the results of any use. The only obligation of either seller or manufacturer shall be to replace any  
quantity of this product that is proved to be defective. Any claim of defective product must be received in writing within one (1) year from  
date of shipment. Neither seller nor manufacturer assumes any liability for injury, loss or damage resulting from use of this product.  
Contact EPMAR for any additional application information  
Epmar Corporation  
13240 Barton Circle, Whittier, CA 90605  
Ph: 562.946.8781 / Fax: 562.944.9958  
epmar.com / kemiko.com  
Rev061919